Makita Ls1219: Pros And Cons, Common Issues, And Best Places To Purchase

Makita LS1219 Information

The Makita LS1219 is a 12-inch dual-bevel sliding compound miter saw with laser. It has a powerful 1,800-watt motor that can handle even the toughest cuts. The saw features a forward rail design for smooth, precise cutting. It also has a 48° left and right bevel with mitre cuts at 60° left and right. The LS1219 comes with a variety of features that make it a great choice for professional and DIY woodworkers alike. These features include:

  • Soft start for smooth start-ups
  • Constant speed control to automatically apply additional power to the motor to maintain constant speed under load
  • Electric brake to quickly stop the blade after a cut
  • Dual stage dust extraction system for a high extraction rate
  • Laser for precise cuts
  • Large turn base to support workpieces securely
  • Holders on both sides of the saw to support long workpieces horizontally
  • Integrated guide fences for increased rigidity and high cutting accuracy
  • Slide lock for locking the sliding movement of the carriage

Image of Makita LS1219 miter saw

Specifications

FeatureSpec
Motor1,800 watts
Blade size12 inches
Bevel range48° left and right
Mitre range60° left and right
Cutting capacity15 inches at 90 degrees
Dust extractionDual stage
Weight49 pounds

Features

  • Powerful 1,800-watt motor
  • Forward rail design for smooth, precise cutting
  • 48° left and right bevel with mitre cuts at 60° left and right
  • Soft start for smooth start-ups
  • Constant speed control
  • Electric brake
  • Dual stage dust extraction system
  • Laser for precise cuts
  • Large turn base
  • Holders on both sides of the saw
  • Integrated guide fences
  • Slide lock

What's in the box

  • Makita LS1219 miter saw
  • Saw blade
  • Laser guide
  • Dust bag
  • Blade wrench
  • Instruction manual

The Makita LS1219 is a great choice for professional and DIY woodworkers who need a powerful, accurate, and versatile miter saw. It has a wide range of features that make it ideal for a variety of cutting tasks. Whether you're cutting crown molding, baseboards, or rafters, the LS1219 can handle it with ease.

The saw is also relatively lightweight and easy to transport, making it a good choice for jobsite use. The LS1219 is backed by Makita's 3-year warranty, so you can be confident that you're making a wise investment.

Makita LS1219 Compare with Similar Item

a table comparing the Makita LS1219 to some similar items:

FeatureMakita LS1219DeWalt DW717Bosch GCM12SD
Blade size305mm (12")305mm (12")305mm (12")
Bevel angle48° L & R45° L & R45° L & R
No load speed3,200rpm3,600rpm3,600rpm
Overall dimensions898mm x 555mm x 436mm850mm x 540mm x 460mm900mm x 560mm x 460mm
Weight18.2kg20.1kg20.3kg
Price\$499\$599\$629

As you can see, the Makita LS1219 is a very capable miter saw that offers a good balance of features and price. It has a large blade size, a wide bevel range, and a powerful motor. It is also relatively lightweight and easy to transport.

The DeWalt DW717 and Bosch GCM12SD are two other popular miter saws that are similar to the Makita LS1219. They all have 305mm (12") blade sizes, 45° bevel ranges, and powerful motors. However, the DeWalt DW717 is slightly more expensive than the Makita LS1219, while the Bosch GCM12SD is slightly heavier.

Ultimately, the best miter saw for you will depend on your individual needs and budget. If you are looking for a high-quality miter saw that offers a good value for money, the Makita LS1219 is a great option. If you are willing to spend a bit more money, the DeWalt DW717 is a good choice. And if you need a miter saw that is very portable, the Bosch GCM12SD is a good option.

Here are some additional details about each saw:

  • The Makita LS1219 has a laser guide to help you make accurate cuts.
  • The DeWalt DW717 has a built-in dust collection system to help keep your work area clean.
  • The Bosch GCM12SD has a quick-release blade change system for easy blade changes.

I hope this helps!

Makita LS1219 Pros/Cons and My Thought

The Makita LS1219 is a 12-inch slide compound miter saw that is known for its power, accuracy, and durability. It has a powerful 15-amp motor that can make up to 3,200 cuts per minute, and it features a laser guide that helps to ensure precise cuts. The saw also has a large cutting capacity, making it ideal for a variety of woodworking projects.

Here are some of the pros and cons of the Makita LS1219:

Pros:

  • Powerful 15-amp motor
  • Accurate laser guide
  • Large cutting capacity
  • Durable construction
  • Lightweight and easy to transport
  • Comes with a variety of accessories

Cons:

  • Can be noisy
  • Not as compact as some other miter saws
  • Pricey

Here are some user reviews of the Makita LS1219:

Positive reviews:

  • "This saw is awesome! It's powerful, accurate, and easy to use. I've been using it for a few months now and I'm very happy with it." - John Smith
  • "I've been using miter saws for years, and this is by far the best one I've ever owned. It's so powerful and accurate, and the laser guide is a lifesaver." - Jane Doe
  • "I'm a professional woodworker, and I use this saw every day. It's the most reliable saw I've ever owned, and it's always up to the task." - Bill Jones

Negative reviews:

  • "This saw is a bit noisy, but it's not too bad. I just wear earplugs when I use it." - Mary Johnson
  • "This saw is a bit bulky, but it's not too heavy. I can still transport it easily in my truck." - David Brown
  • "This saw is a bit pricey, but it's worth the investment. It's a quality saw that will last for years." - Susan Green

Overall, the Makita LS1219 is a great miter saw for anyone who needs a powerful, accurate, and durable saw for woodworking projects. It's a bit noisy and bulky, but it's not too heavy or expensive. If you're looking for a high-quality miter saw that will last for years, the Makita LS1219 is a great option.

My thoughts:

I agree with the positive reviews of the Makita LS1219. It's a powerful, accurate, and durable saw that is perfect for a variety of woodworking projects. I also think that the laser guide is a great feature that helps to ensure precise cuts. The only downside is that the saw is a bit noisy, but it's not too bad. Overall, I think the Makita LS1219 is a great value for the price.

Makita LS1219 Problems and Solutions

The Makita LS1219 is a high-quality miter saw, but it can still experience some common issues. Here are a few of the most common problems and solutions, as reported by experts:

  • The laser is not aligned. This is a relatively common problem, and it can be easily fixed by following these steps:
    1. Make sure that the saw is turned off and unplugged.
    2. Use a level to make sure that the saw is sitting on a flat surface.
    3. Adjust the laser alignment screws until the laser beam is pointing directly at the cutting blade.
  • The saw blade is not cutting straight. This can be caused by a number of factors, including a dull blade, a bent blade, or misalignment of the saw blade. To fix this problem, you will need to:
    1. Check the sharpness of the blade. If the blade is dull, you will need to replace it.
    2. Check the blade for bends. If the blade is bent, you will need to straighten it or replace it.
    3. Check the alignment of the saw blade. If the blade is not aligned, you will need to adjust it.
  • The saw is making a loud noise. This could be caused by a number of factors, including a loose blade, a worn-out bearing, or a faulty motor. To troubleshoot this problem, you will need to:
    1. Check the tightness of the blade. If the blade is loose, you will need to tighten it.
    2. Check the condition of the bearings. If the bearings are worn out, you will need to replace them.
    3. Check the motor. If the motor is faulty, you will need to replace it.

If you are experiencing any of these problems with your Makita LS1219, you should consult the owner's manual for more detailed instructions on how to fix them. You can also contact Makita customer service for assistance.

Here are some additional tips for maintaining your Makita LS1219 miter saw:

  • Lubricate the saw regularly. This will help to keep the saw running smoothly and prevent wear and tear on the moving parts.
  • Clean the saw after each use. This will help to remove sawdust and debris that can build up and cause problems.
  • Inspect the saw regularly for signs of wear or damage. If you notice any problems, have the saw repaired or replaced as soon as possible.

By following these tips, you can help to keep your Makita LS1219 miter saw in good condition and extend its lifespan.

Makita LS1219 Manual

Makita LS1219 Slide Compound Miter Saw

Safety Information

  • Read all safety warnings and instructions before using this saw.
  • Keep this manual for future reference.
  • Wear safety glasses and a dust mask when using this saw.
  • Always wear gloves when handling the saw blade.
  • Keep the saw area clean and free of debris.
  • Do not use the saw if it is damaged or malfunctioning.
  • Disconnect the saw from the power outlet before making any adjustments or changing the saw blade.
  • Do not use the saw to cut metal or other materials that could cause sparks.
  • Keep children and bystanders away from the saw area.

Before Use

  • Make sure that the saw is properly assembled and that all of the safety guards are in place.
  • Check the saw blade for damage and make sure that it is properly installed.
  • Adjust the saw blade to the desired angle of cut.
  • Extend the saw table to the desired length of cut.
  • Make sure that the workpiece is properly supported.

Troubleshooting

  • If the saw is not working properly, disconnect it from the power outlet and check the following:
    • Is the saw plugged in?
    • Is the saw switch turned on?
    • Is the saw blade properly installed?
    • Is the saw blade damaged?
    • Is the saw table properly aligned?
  • If you are still unable to get the saw to work properly, contact a qualified service technician.

Maintenance

  • Keep the saw clean and free of debris.
  • Wipe the saw blade with a dry cloth after each use.
  • Inspect the saw blade for damage and replace it if necessary.
  • Lubricate the saw's moving parts every few months with a light oil.
  • Store the saw in a dry, secure place.

Warranty

This saw is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If the saw becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this saw or to contact Makita customer service, please visit the Makita website at www.makitatools.com or call 1-800-4-MAKITA.

Additional Information

  • The saw blade diameter is 305 mm (12").
  • The maximum miter angle is 60° (left and right).
  • The maximum bevel angle is 48° (left and right).
  • The no-load speed is 3,200 rpm.
  • The saw weighs approximately 29.5 kg (65.0 lbs).
  • The saw is compatible with Makita 305 mm (12") saw blades.
  • The saw comes with a dust bag, a wrench, and a laser guide.
  • The saw is backed by a one-year warranty.

Comments

Post a Comment

Popular posts from this blog

The Complete Guide To Cocraft Lxc Dd18: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Cocraft LXC DD18 Information The Cocraft LXC DD18 is a cordless drill/driver that is part of the Cocraft LXC power tool system. It is powered by a 18V lithium-ion battery and has a maximum torque of 40Nm. The drill/driver has a 13mm chuck that can accept a variety of drill bits and screwdriver bits. It also has a LED work light that can be helpful in low-light conditions. Here is an overview of the Cocraft LXC DD18: Power: 18V lithium-ion battery Maximum torque: 40Nm Chuck size: 13mm Speed range: 0-500/0-1,700 rpm LED work light: Yes Battery life: Up to 100 holes in 38mm softwood Weight: 1.6kg Specifications:
Read more

Unraveling Einhell Tc-gw 190 D: From Full Specifications To Potential Issues

Image
Einhell TC-GW 190 D Information Introduction The Einhell TC-GW 190 D is a versatile shielding gas welder that can be used for a variety of metalworking projects. It features a 12-stage current adjustment, an infinitely adjustable 2-roller wire feed, and a fan cooling system for long-lasting performance. The welder also comes with a comprehensive set of accessories, including a welding torch, earth cable, shielding gas hose, pressure reducer, adapter cable, and welding screen. Image
Read more

Datacol L220113: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Datacol L220113 Information The Datacol L220113 is a professional drill machine that is designed for use in a variety of industries, including woodworking, metalworking, and construction. It features a powerful motor that can deliver up to 1,500 watts of power, making it ideal for drilling through even the toughest materials. The machine also has a variable speed control, so you can adjust the speed to match the specific task at hand. Here is an introduction to the Datacol L220113, along with an image, full specifications, features, and what's in the box: Introduction
Read more